Apeks Frequently
Asked Questions
|
|
Next
Page >>
|
Q. |
What is a cold water regulator? |
A. |
It is a regulator that is designed to be used in water of any temperature. The 1st stage is environmentally sealed. |
|
Q. |
What is a warm water regulator? |
A. |
A regulator designed to be used in water 10 degrees Celsius and above. |
|
Q. |
What is the intermediate pressure of Apeks' regulators? |
A. |
All Apeks regulators have an intermediate pressure of 9.0 - 10.0 BAR |
|
Q. |
How often should my Apeks' regulator be serviced? |
A. |
The 2nd Stage should be serviced annually. The 1st Stage should have the intermediate pressure checked and filter changed annually and be fully serviced every 2 years. |
|
Q. |
Can my Apeks' regulator be converted for Oxygen/Nitrox service? |
A. |
Apeks regulators as standard are suitable for use with up to 40% O2 but you must check what regulations apply to your country. For example within Europe we must adhere to the European Standards EN144-3 and EN13949 which state that regulators used with EAN over 21% must use the special Nitrox M26 fitting. The following models can be converted for nitrox use with over 40% oxygen ( up to 100%); T40D, TX40, T50D, TX50, TX100, T20, ATX200, ATX100, ATX50, ATX40, AT20, XTX200, XTX100, XTX50, XTX40, XTX20, Egress, TEK3. Late 5000ST and Sentinels. Older piston 1st Stages cannot be converted. |
|
|
|
Free Apeks PC Logbooks (not for 64 bit drivers) ...
|
|
|
|
|
|
|
|
|
|

|